Phone. +7 (351) 749-93-55
+7 (351) 749-93-60
Chelyabinsk, Pobedy Ave, 290

Use

To hide the search form Click to select

Power supply blocks for sensors БП and БПM

Category: Power supplies

Name

Email *

Phone

Message

1000 characters left

Я согласен(а) на обработку персональных данных *

Обработка персональных данных включает согласие с Пользовательским соглашением и Политикой конфиденциальности и Вы принимаете их условия.

Conversion of the electrical line alternate voltage into a stabilized voltage of direct current for the supply of sensors, measuring transmitters and other devices.

Output voltages 12, 15, 18, 24, 36 V;
Up to 8 galvanically isolated channels;
Load current up to 500 mA;
Overload and short circuit protection;
Power supply filter reducing the disturbance level;
Indication of the voltage supply on the unit output on each channel;
Version with an operation temperature range from -60 to +50 °С;
DIN-, wall - or panel board-mounted

Manufactured in accordance to TC 4276-001-2160758-2004

Использование

Functional equipment

The power supply unit consists of a reducing transformer and one, two, four or eight galvanically separated channels each of which has a rectifier, pulse filter, linear stabilizer with an overload protection electric protection.

The electric protection circuit is intended to protect a power supply unit against overloading and short circuits in a load. The power supply unit automatically switches to the operating mode after overload or short circuit elimination.

Key technical characteristics

Parameter	Value
A.C. supply voltage range, V	187...242 (120...265 for BMP-1ch, 2ch of the DIN-M version with a load current up to 100 mA inclusive)
A.C. supply voltage frequency, Hz	49...51
Stabilization class of block output voltage	0,2
The change of the output voltage value at the maximum load current induced by the change in supply voltage within permissible limits, % of the voltage nominal value	not more than ±0,2
The change of the output voltage value induced by the change in the load current from 0 up to the maximum value, % of the voltage nominal value	not more than ±0,2
The change of the output signal value induced by the change in the ambient temperature within the range of operating temperatures, % of the voltage nominal value for every 10 °С	not more than ±0,2
Block output voltage pulsation, % of the voltage nominal value	not more than ±0,2
Insulation strength between the input supply channel and output channels, V	1500
Insulation strength between output channels, V	100
Structural design (by order)	БПМ — plastic body frame with a DIN or wall mounting option(version DIN, DIN-M) БП — plastic body frame with a metal face plate mounted in the panel board (version 01)* БП — plastic body frame with a metal face plate mounted in the panel board (version 01К)*

* — versions 01 and 01К are different by the dimensions of a face plate (insert 2).

Options of versions depending on output voltages and currents

Output voltage, V	МаксиMaximum channel load current, mA	Number of channels	Current Ch3,mA, not more	Tripping event current, mA, not more	Consumed power, V · A, not more	Weight, kg
Output voltage, V	МаксиMaximum channel load current, mA	Number of channels	Current Ch3,mA, not more	Tripping event current, mA, not more	Consumed power, V · A, not more	Din version	Version 01, 01к
36	25	1	15	30	2,2	0,10	0,43
		2			4,0	0,10	0,45
		4			6,5	0,65	0,75
		8			13,0	1,00	1,10
	45(50)	1	35	75	3,5	0,10	0,43
		2			6,5	0,10	0,45
		4			13,0	0,65	0,75
		8			26,0	1,00	1,10
	80	1	30	120	5,0	0,10	0,68
		2			9,5	0,10	0,70
		4			21,0	0,65	0,75
	100	1	30	130	6,2	0,10	0,73
	100	2	30	130	12,0	0,10	0,75
	120	1	30	135	11,6	0,63	0,73
	120	2	30	135	16,0	0,65	0,75
24	25	1	15	30	1,6	0,10	0,43
		2			2,6	0,10	0,45
		4			4,5	0,65	0,75
		8			9,0	1,00	1,10
	45(50)	1	35	70	2,5	0,10	0,58
		2			4,5	0,10	0,60
		4			9,0	0,65	0,75
		8			17,5	1,00	1,10
	80	1	30	120	3,7	0,10	0,73
		2			7,0	0,10	0,75
		4			14,0	0,65	0,75
	100	1	30	130	4,5	0,10	0,73
		2			8,5	0,10	0,75
		4			17,5	0,70	0,75
	120	1	30	135	5,1	0,33	0,43
		2			10,0	0,35	0,45
		4			21,0	0,70	0,75
	250	1	38	270	16,0	0,63	0,75
	250	2	38	270	22,0	0,67	0,77
	300	1	30	315	13,0	0,63	0,73
	120 и 300	1 (channel 1к) 1 (channel 2к)	30 30	135 315	5,5 13,0	0,65	0,75
	500	1	130	600	22,0	0,67
18	250	2	30	300	8,5	0,65	0,75
15	120	4	30	135	3,5	0,65	0,75
12	25	1	18	35	0,9	0,10	0,43
		2			1,0	0,10	0,45
		4			2,5	0,65	0,75
		8			4,5	1,00	1,10
	45(50)	1	35	70	1,2	0,10	0,58
		2			2,5	0,10	0,60
		4			4,5	0,65	0,75
		8			9,0	1,00	1,10
	80	1	30	120	2,0	0,10	0,58
		2			3,5	0,10	0,60
		4			7,0	0,65	0,75
	100	1	30	130	2,4	0,10	0,63
		2			4,4	0,10	0,65
		4			9,0	0,65	0,75
	120	1	30	150	3,8	0,38	0,73
		2			5,2	0,40	0,75
		4			10,5	0,65	0,75

By the order, power supply units can be manufactured with other output voltages and load currents.

Overall dimensions of the blocks БП-1ch, 2ch, 4ch, version 01

1 — panel board;
2 — light emitting diodes indicating the channel work;
3 — warranty label;
4 — кterminal blocks DG301-5.0-02P to connect output voltage;
5 — connector 2РМ14КПН4Ш1В1 to connect supply voltage;
6 — grounding bolt.

Marking for cut-offs in a panel board (version 01)

Power supply units 1k and 2k are different by the absence of corresponding channel light emitted diodes on the front panel.

The version 01 does not provide for an 8-channel power supply unit.

Overall dimensions of the blocks БП-1k, 2k, 4k, version 01K

1 — panel board;
2 — light emitting diodes indicating the channel work;
3 — warranty label;
4 — terminal blocks DG301-5.0-02P to connect output voltage;
5 — connector 2РМ14КПН4Ш1В1 to connect supply voltage;
6 — grounding bolt.

Overall dimensions of the blocks БП-8k, version 01K

The versions 1k, 2k, 4k are different by the front panel with the thickness of 3 mm and the absence of corresponding LEDs on it.

Marking for cut-offs in a panel board ,version 01К

Разметка под вырезы в щите (исполнение 01К)

Overall dimensions of the blocks БПM-1k (all except for 120, 250, 500 mA), the version DIN-М

Габаритные размеры блоков БПМ-1к (все, кроме 120, 250, 500 мА) (исполнение DIN-М)

Overall dimensions of the blocks БПM-2k (all except for 250, 500 mA), the version DIN-М

Габаритные размеры блоков БПМ-2к (все, кроме 120, 250 мА) (исполнение DIN-М)

1 — terminal blocks DG128-5.0-02P to connect output voltage;
2 — LEDs indicating the channel work;
3 — клеммник terminal block DG128-5.0-03P to connect supply voltage;
4 — DIN-rail;
5 — warranty label.

Overall dimensions of the blocks БПM-1k (120, 250, 500 mA), the version DIN

Габаритные размеры блоков БПМ-1к (120, 250, 500 мА) (исполнение DIN)

Overall dimensions of the blocks БПM-2k (120, 250 mA), the version DIN

Габаритные размеры блоков БПМ-2к (120, 250 мА) (исполнение DIN)

1 — terminal blocks DG128-5.0-02P to connect output voltage;
2 — LEDs indicating the channel work;
3 — terminal block DG128-5.0-03P to connect supply voltage;
4 — DIN-rail;
5 — warranty label.

Overall dimensions of the blocks БПM-4k, version DIN

Габаритные размеры блоков БПМ-4к (исполнение DIN)

Overall dimensions of the blocks БПM-8k, version DIN

Габаритные размеры блоков БПМ-8к (исполнение DIN)

Connection diagram of the blocks БП-1k, version 01 (01K)

Connection diagram of the blocks БП-2k, version 01 (01K)

Connection diagram of the blocks БП-1k, version 01 (01K) Connection diagram of the blocks БП-2k, version 01 (01K)

Connection diagram of the blocks БП-4k, version 01 (01K)

Connection diagram of the blocks БП-8k, version 01K

Connection diagram of the blocks БПM-1k (all except for 120, 250, 500 mA), the version DIN-М

Connection diagram of the blocks БПM-2k (all except for 120, 250 mA), the version DIN-М

Connection diagram of the blocks БПM-1k (120, 250, 500 mA), the version DIN

Connection diagram of the blocks БПM-2k ( 120, 250 mA), the version DIN

Connection diagram of the blocks БПM-4k, version DIN

Connection diagram of the blocks БПM-8k, version DIN

Parameter	Value
Ambient temperature, °С	-10…+50; -60…+50 (для блока БПМ-1к-24-500 по заказу)
In terms of climatic effect resistance at operation corresponds to the version group, under GOST R 52931–2008	С3
In terms of climatic effect resistance at operation corresponds to the version group, under GOST R 15150(by order))	Т3
In terms of mechanical impact resistance at operation corresponds to the version group, under GOST R 52931–2008	L3
Ingress protection level, under GOST 14254–96: version DIN version 01 (01К)	IP20 IP30

Warranty liabilities

Parameter	Value
Warranty operating life, months	36 months since the commissioning date but no more than 42 months since the date of manufacture

Contents of delivery

Name	Designation	Number	Note
Power supply unit		1	in accordance to the order
Data sheet, Operation manual		1
ХР1-socket	2РМ14КПН4Г1В1	1	for the versions 01 and 01К
DIN rail	NS35\7,5		by order

Designations at the order

БПМ	4к	24	100	DIN		360	Т3
1	2	3	4	5	6	7	8

Name:
- БП — panel board version;
- БПМ — DIN or wall-mounted versions.
Number of channels:
- 1к — one channel;
- 2к — two channels;
- 4к — four channels;
- 8к — eight channels.
Power supply blocks БП-8к (panel board version) have only the version 01K.
Output voltage, V.
Maximum channel load current, mA.
Structural design:
- DIN-M — DIN-mounted version (for the blocks БПM-1k, 2k with the nominal current up to 100 mA inclusively);
- DIN — DIN-mounted version (for other blocks);
- 01 — panel board version;
- 01К — panel board version.
Temperature range for the power supply blocks БПM-1k-24-500-DIN:
- 60 — range -60…+50°С;
- no symbol — range -10…+50°С.
Additional technological no-failure operating time 360 hours.
Tropical version.

Certificates

БП, БПМ Certificate of Compliance CU TR 22.01.2020 (RU)

Documents

Applications

Feedback