Charger for car batteries БПЗ-80

Category: Power supplies

1000 characters left
Обработка персональных данных включает согласие с Пользовательским соглашением и Политикой конфиденциальности и Вы принимаете их условия.

Accumulator battery (ACB) charging as well as the application as a secondary power supply source.

  • Compact metal body frame;
  • Fully automatic operation;
  • The time of an ACB connection is not limited;
  • Overload protection;
  • Protection against ACB wrong connection;
  • Operation within a wide temperature range: from -40 to +50 °С.

Manufactured in accordance with the technical conditions EI.108.00.000 TC

Использование Etc

The charger is used to charge ACBs with a nominal voltage 12 V, capacity 50 A* per hour and higher as well as to charge the ACB with the voltage 4,5...9 V and charge current at least 5 A (in the current generator mode).

The charger can be used as a power supply source for various devices with the voltage 12...14 V and current consumption up to 5 A.

The charger operates in the automatic mode, i.e., does not require ACB charging mode monitoring. The time of an ACB connection is not limited.

The charge circuit is galvanically separated from the electric main, has an overload and short circuit electric protection for the output terminals, protection against the charged ACB wrong connection (reverse polarity), overheating protection, LED indication of operation modes and ACB charge finishing.

Key technical characteristics

ParameterValue
Power supply voltage, V
in the industrial main 50 Hz
of D.C. source

154...264
210...360
Consumed power, W 80
Consumed power at no load, W 1,6
Maximum output D.C., A 5
Output voltage range at no output current, V 14,0...14,2
Output voltage instability:
at the change of main voltage, V
at the change of load current, V

less than
less than 0,1
Pulsation voltage, mV not more than 50
Overall dimensions, mm 90×35×120
Weight, kg 0,3

Approximate time of full charge of some starter ACBs

Тип АКБ6СТ- 506СТ- 556СТ- 606СТ- 756СТ- 826СТ- 90
Время заряда, час 9 10 11 14 15 16

Face side

Face side БПЗ-80

Lateral side

Lateral side БПЗ-80

It is allowed to connect two and more chargers in parallel to increase the charging current 10A, 15 A, ...

parallel connection БПЗ-80

It is allowed to consecutively connect two and more chargers to increase the charging voltage 24 V, 36 V...providing the compliance with the connection polarity. Output load current is 5 A.

serial connection БПЗ-80

 

ParameterValue
Ambient temperature, °С −40...+50
Electric shock protection class I
Ingress protection level, under ГОСТ 14254–96 IP40

It is necessary to locate the charge on the even horizontal surface with a downside situated towards the surface. Such location provides for a better body frame cooling due to heat rejection. At the charge of high-capacity ACBs (150 A*h and more) at the ambient temperature of more than 25 °С , the body frame could be heated up to more than 60 °С with the further charger switch-off. The charge switches on automatically at the charger cooling to the temperature less than 60 °С

Warranty liabilities

ParameterValue
Warranty operating life, months 36 months since the commissioning date but no more than 42 months since the date of manufacture

Contents of delivery

NameDesignationNumberNote
БПЗ-80-14 В-5 А   1  
Data sheet, Operation manual   1  

Designations at the order

БПЗ-8014 В5 АК
1 2   3
  1. Name.
  2. Output voltage:
    • 14 V – output voltage range 14.00...14.2 V;
    • 13.8 V – by the customer’s order it is possible to manufacture BPZ -80 with the output voltage range 13.7…13.9 V.
  3. Terminal block types:
    • at the absence of the symbol - “crocodile” terminal blocks;
    • K – ring lug M6.

Documents

  1. BPZ-80, Data sheet, Operation manual 27.05.2015 (pdf)

Feedback

  1. M-Servis, LLC (Car Salon BMV)

Articles

  1. Automatic Charger for Accumulator Batteries and Reliable Power Source for Electric Devices BPZ-80

Frequently asked questions

  1. The maximum battery discharge current in this case does not exceed 10 mA.
  2. Yes, it will be suitable. The maximum charge current for such a battery is 9...10 A. If a person uses one charger, the charging time of a fully discharged battery will be about 18 hours. If necessary, it is possible to connect two chargers to one battery in parallel, in this case the maximum charging current will be approximately 10 A while the charging time will reduce to 9 hours.
  3. {spoiler title3. This device starts charging (if connected to the battery) after plugging-in (220 V), are there any switch-overs or setting required (mode choice)? opened=0}This charger starts battery charging immediately after hooking up in the electrical main (220 V) providing the battery is connected with the charger. No switch-overs or mode choice are required.{/spoiler}

Charger for car batteries БПЗ-80

Charger for car batteries БПЗ-80
wait Item successfully added.
Proceed to checkout?
1000 characters left
Обработка персональных данных включает согласие с Пользовательским соглашением и Политикой конфиденциальности и Вы принимаете их условия.