JM Renewable Energy - шаблон joomla Новости

In the near future a product range of communication devices produced by Energiya-Istochnik will be extended to include anew HART-modem ЭнИ-406.

HART-modem ЭнИ-406

Photo 1

 ЭнИ-406-DIN for DIN rail mounting

Photo 2 

 Intended use:

PC/controller connection with field devices (pressure transmitters, temperature sensors, flowmeters) communicating data through a HART-protocol.

Advantages:

  • data receipt/transmission high reliability;
  • does not require any additional power supply unit;
  • use with any HART-configuring devices to work with devices;
  • connecting up to 15 devices plugged to one line;
  • built-in resistor 250 Ohm;

Key technical characteristics:

  • Computer connection interface — USB;
  • USB-supply;
  • maximum supply voltage in the HART circuit - 42 V;
  • wide operating temperature range from minus 20 up to plus 70 °С;
  • signal receipt/transmission indication, power supply indication;
  • versions: for DIN-mounting or desktop mounting;
  • built-in source 24 V, 25 mA for the device power supply through a current loop 4…20 mA;
  • strength of insulation between interfaces 500 V.

ЭнИ-406, version 01, with a built-in power supply source - overall dimensions

  • ЭнИ-406, version 01, with a built-in power supply source - overall dimensions

1 — LED “Receipt”;
2 — LED “Transmission”;
3 — LED indicating power supply 24 V;
4 — connector 2EDGK-5.0-04P for connection to a current loop;
5 — connector mini-USB to connect a modem to a PC or controller.

ЭнИ-406, version 01, without a built-in power supply source - overall dimensions

ЭнИ-406, version 01, without a built-in power supply source - overall dimensions

1 — LED “Receipt”;
2 — LED “Transmission”;
3 — LED indicating power supply from the USB-port;
4 — connector 2EDGK-5.0-03P for connection to a current loop;
5 — connector mini-USB to connect a modem to a PC or controller.

ЭнИ-406-DIN to be DIN-mounted, overall dimensions

ЭнИ-406-DIN to be DIN-mounted, overall dimensions

1  — connector mini-USB to connect a modem to a PC or controller;
2 — LED “Transmission”;
3 — LED “Receipt”;
4 — LED indicating power supply from the USB-port;
5 — connector DG128-5.0-03P for connection to a current loop;
6 — warranty label.

For all questions, please, contact the technical support service:

  • by phone:  +7(351)751-23-42
  • icq: ico icq15x15 715058620;
  • Telegram, Viber, WhatsApp: +7(922)011-41-53.