JM Renewable Energy - шаблон joomla Новости

To solve the problem of measuring the pressure of a high-temperature medium in several ways: to install a measuring device that works correctly at high temperature, or to take out a sensor (pressure gauge) from the site of the working medium selection. The first solution will be expensive, the second will require additional installation of impulse lines and protective cabinets.

LLC "Itek BMW" proposes to use a cooling ОХ-100, designed for cooling the working medium flowing into the working cavity pressure sensors for high temperature environments. Lowering the temperature of the medium to an acceptable level is due to air circulation and heat removal.

Example of mounting the cooler

Figure. Example of mounting the cooler

We produce 2 types of coolers, providing protection of measuring devices from the effects of high-temperature working environments up to 350 °C.

The standard version have the following features:

  • Working pressure up to 40 MPa.
  • Material steel 12Х18Н10Т
  • Mounting dimensions:
    • to the device: М20×1,5; G1/2;
    • towards the process: М20×1,5; G1/2.

On request, it is possible to manufacture with other connecting threads and other materials.

Production time 1 week.

Send applications for the purchase of coolers to e-mail order@bbmv.ru or call the sales Department +7 (351) 749-93-55.

Ask questions to technical support:

  • phone (351) 751-23-42
  • e-mail: support@en-i.ru.
  • icq  ico icq15x15  715058620;
  • Viber, WhatsApp: +7(922)011-41-53