Dear partner!
At the end of may, the discrete signal output module will enter the market ЭнИ-702Р.
Advantages:
- 12 switching channels of discrete signals;
- Wide operating temperature range from minus 40 to plus 50 °С;
- Integrity control lines of the RS-485 interface and switching outputs of the switching channels to the safe state defined by the user, when the cliff line interface;
- Self-diagnostics of the module operation and switching channel outputs transition to a user-defined safe state in case of emergency operation;
- Galvanic isolation of switching channels between themselves and the RS-485 interface;
- The removable terminal connectors, which simplify the process of installation and replacement;
- The function of the PWM control;
- Preset user safe-state switching at power on;
- The ability to set the algorithms of channels switching (timer, time, off channels);
- Saving information about the current state of channels and module settings in non-volatile memory;
- Counter online relay operation;
- Status indication of the channels of the switching-test diagnostic module;
- Ability to configure and manage the module using the Configurator included in the package.
Overall dimensions of the discrete module ЭнИ-702Р
1 — connector for connection to RS-485 interface;
2 — led indication for errors;
3 — power supply voltage indication led;
4 — connector for connection to the supply voltage;
5 — connectors for connection of Executive equipment (switching channels);
6 — LEDs for indication of operation of control channels;
7 — warranty label;
8 — DIN-rail.
Main technical characteristics
- AC supply voltage range: 110…265 В;
- Power consumption: less than 6W;
- Design: plastic housing for DIN rail mounting NS35\7,5;
- Degree of protection according to GOST 14254: IP30;
- Weight not more than 0,35 kg;
- Switching channels execution options:
- — relay - switching DC to 2 A (250 V) or AC to 5 A (250 V), one switching group;
- — optorele - switching DC / AC up to 4.5 a (20 V);
- — optorele - switching DC / AC 200 mA (400 V);
- — optosymistor - switching AC current to 300 mA (250 V);
- The data transmission Protocol MODBUS RTU.
If you need the output of discrete control signals to actuators (actuators, relays, valves) on the commands transmitted over the RS-485 network, send purchase orders to e-mail: order@bbmv.ru or contact the sales Department: tel.: +7(351)749-93-60, 742-44-47, 749-93-55.
If you have any questions, please contact technical support by phone +7 (351)751-23-42 or by e-mail: support@en-i.ru.